Size the moldy area | Decide if you have a large or small area of mold. A small area is less then about ten square feet, or a patch three feet by three feet square. To clean a small area, follow the advice below. You may use a cotton face mask for protection. If you have a lot of mold damage (more then ten square feet) consider hiring a cleaning professional. If the moldy area has been contaminated by sewage or is in hidden places hire a professional. To find a professional, check under "Fire and Water Damage Restoration" in your Yellow Pages. If you decide to clean up on your own, follow the guidance below. |
Use protection | Wear goggles, gloves, and breathing protection while working in the area. For large consolidated areas of mold growth, you should wear an Occupational Safety and Health Administration (OSHA) approved particle mask. |
Seal the area | Seal off area from the rest of your home. Cover heat registers or ventilation ducts/grills. Open a window before you start to clean up. |
Remove items | Remove all your furnishings to a mold-free area. Clean the surrounding moldy area then follow cleaning directions below for the items you removed and the new space. |
Bag moldy trash | Bag all moldy materials and tie off the top of the bag. Bring them outdoors and place in your garbage container right away. |
Scrub surfaces | Scrub hard surfaces: - First wash with a mild detergent solution, such as laundry detergent and warm water. Allow to dry.
- (Optional step) Then wipe with a solution of ¼ cup bleach to one quart of water. Wait 20 minutes and repeat. Wait another 20 minutes.
- Last apply a borate-based detergent solution and don’t rinse. This will help prevent mold from growing again. A borate-based laundry or dish washer detergent has “borate” listed on the ingredients label.
|
Clean and wash | Give the entire area a good cleaning, vacuum floors, and wash any exposed bedding or clothing. |
Monitor | Check regularly to make sure mold has not returned to the clean-up area. |